Glass Treatment

There is the possibility that small micro-breaks on the edges of cut formats may occur duringthe cutting process. Thanks to the process of grinding edges, the risk of breaking as a result of increased inner tensions under insolation (thermal stresses) or under the influence of mechanical forces (forced compressions, physical blows and others) is lowered.

There is the possibility that small micro-breaks on the edges of cut formats may occur duringthe cutting process. Thanks to the process of grinding edges, the risk of breaking as a result of increased inner tensions under insolation (thermal stresses) or under the influence of mechanical forces (forced compressions, physical blows and others) is lowered.

When installing glass parts or facades, mounting handles, assembling furniture, there is a need to make openings on the glass. Kristian Neiko has state-of-the-art drilling technologies with great precision of these holes, which gives a wide variety of possibilities.

Bevelling creates a visual feel for the natural frame of the glass. It is realized at different angles to the thickness of the glass and can be single double or triple. Glass facetted facades can be part of furniture, doors or interior solutions for a home or office. The veneers give a new and elegant look to your mirrors and tables, and more. You can "frame" not only details with right angles, but also those containing curved sections, and when making a double or triple veneer has an interesting effect, and can also be matted some of the veneers.

Edging is a treatment that achieves a variety of shapes on the side surfaces of the glass. The edges obtained from this treatment can be matted, as well as further sanded or polished. It is possible to pre-edge a large volume of glass panels, which can subsequently be used in the production of any type of door, shelf or any specific glass part. If you are looking for a certain attractive effect for glass furniture together we can come up with shapes that exactly fit your idea.

Many modern technologies are used in the production of modern visual communication tools, such as printing a printer, offset printing, screen printing, foil bonding, application of cut letters and symbols, etc. Although the above methods achieve great results, none of them can achieve the beauty of the engraving

Today, thanks to the combination of computer technology and centuries-old traditions in glass engraving, it has been possible to achieve exceptional results. Now, as before, engraving is done by mechanically removing a thin layer of material, thus achieving the unique effect of parallel paths, as if they were engraved by hand.

With our state-of-the-art technology base, we achieve this effect, providing a product that cannot be compared to anything else.

Holes and notches are required in many fastening systems. This solution makes it possible to construct building elements where the glass forms flat surfaces that are not disturbed by structural elements. Making holes also allows for wider use in interiors such as decoration and components of home appliances. It increases the ability to create new structural solutions and create interiors by architects.